Advertisement
I
TRs·ao
The Connecting Cable
Use the cable supplied by your Gemini dealer for yourTRS Model
II or Model III computer. No interface kit is required for these
models.
Setting the DIP Switches
Set switch number 2-3 to the "off" position on your Gemini. You
may set switch number 2-1 in either position, at your option.
Switch number 2-2 should be set "off" if you want Gemini to
print every time it receives a CR code; set to "on" if you wish to
have the carriage return ignored and printing only when the buf-
fer is full.
The TRS-80 computer does not automatically send a line feed
at the end of a line. If you want to insert a line feed (when, for ex-
ample, listing a program), turn DIP switch number 2-4 to the "on"
position.
The Use of BASIC
206
The Model II computer may need to be initialized to properly run
the sample programs in this user's manual. From BASIC, type:
SYSTEM "FORMS"
and respond to the questions asked by the computer. Then, type:
Q
and the system will correctly route LPRINT commands to your
Gemini.
• •
•
•
• •
• •
• •
• •
• •
• •
• •
• •
•
• •
Advertisement
