Advertisement
I
Gemini User's Manual
Platen
Platen jamb
Figure G-3. The Gemini-10X (shown here) and the Gemini-15X both use
a
cardboard form to secure the print head, cardboard inserts to secure the
platen from jostling around.
Note: Be sure you remove all the cardboard packing, before using your
Gemini.
220
First, you need to remove the cardboard packing shown in
Figure G-3.
Note: You might want to save these packing materials, in case you
move, or in case you need to ship your Gemini printer.
After you remove the platen-securing packing, while your
printer is turned "off:' turn the platen knob to roll out the sheet of
paper that is wrapped around the platen (to protect the "out of
paper" sensor).
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
I
Advertisement
