Advertisement
I
• •
• •
•
•
• •
•
•
• •
• •
•
•
• •
•
•
•
•
•
Maintenance
II
Figure 10-2.
Two mounting screws hold the upper casing in place on
the Gemini-10X.
After replacing (or just checking) the fuse, re-attach the upper
casing (reversing the procedure described above) and insert the
mounting screws and the platen knob. (Refer to Figure 1-6 in
Chapter 1 for an "exploded view" of Gemini-10X with its upper
casing removed.)
You probably need to replace the fuse when all of the
following four statements apply to your situation:
• the printer won't operate,
• the power-on lamp isn't lit on the control
panel,
• you are sure that the power switch is "on",
and
•
the printer is connected to a power source.
145
Advertisement
