Advertisement
• •
• •
• •
• •
• •
• •
• •
• •
•
• •
• •
• •
Paper and Ribbon
I
17.
Close the tractor covers.
18.
Rotate the platen knob, and set the print-
start position of the paper.
19.
Turn the power "on" and put your Gemini
to work for you.
Note: The best "start-position" (step 18) will vary according to the
paper on which you are printing and the number of blank lines in
your document. If you are a novice with dot matrix printers, you
might try to position your paper just above the in-place paper press
for your first attempts. With practice, you'll be able to place the
paper right where you want to start printing.
Another note: If you use multipart paper (such as a three-sheet
carbonless form) with your Gemini-15X, you'll need to adjust the
print gap, as discussed later in this chapter.
Congratulations! You've learned how to load the paper_
Next, we'll discuss the ribbon and print gap,
then you'll be on your way to less reading and more printing.
31
Advertisement
