Care And Maintenance; Operating Instructions - Black & Decker BSL189 Instruction Manual

OPERATING INSTRUCTIONS

Using the Spotlight
The quartz halogen Spotlight is operated by the two switches located on the side of the unit.
The top ON/OFF Switch controls the high beam (100 watt) function; the bottom ON/OFF
Switch controls the low beam (approx. 50 watt) function.
Using the 3-LED Auxiliary Light
The 3-LED Auxiliary Light is operated by the LED Auxiliary Light ON/OFF Pushbutton located
on the top of the grip handle.
Using the 12 Volt DC Accessory Outlet
The 12 volt DC accessory outlet powers any DC appliance that does not exceed 5 amps. Flip
up the accessory outlet cover and insert the appliance's DC plug. Close
the cover after use.
Using the Adjustable Workstand
Set the hands-free adjustable workstand to the desired position; then turn the knobs on
either side of the unit to lock in position.

CARE AND MAINTENANCE

All batteries lose charge with time. AC recharge is recommended after each use or every two
months when not in frequent use. Use the AC recharger and charge for the recommended
time.
24