Charging The Battery - Black & Decker BSL189 Instruction Manual

INTRODUCTION
Congratulations on purchasing the Black & Decker 10,000,000 Power Series Spotlight, an
advanced design, dual-filament bulb Spotlight and long lasting, 3-LED Auxiliary Light. It uses
two powerful, proven-technology, rechargeable, non-spillable, sealed, lead acid batteries for
years of dependable use. It was designed to be the most versatile and practical light for
travel, camping, picnicking, tailgate parties and boating. Extremely rugged construction
protects the unit from most vibration and shock damage.
FEATURES
• Powerful, prefocused, replaceable quartz halogen bulb
• High and low beam spotlight settings
• Long-life, 3-LED, ultra bright auxiliary light
• 12 volt DC accessory outlet
• Replaceable sealed lead acid battery
• AC/DC recharge adapter
• Fused DC/DC recharge adapter and power cord
• LED charging indicator
• Removable carry strap
• Protective rubber safety guard (bezel) around lens
• Hands-free adjustable workstand with position locks
3-LED Auxiliary
Light
Rubber
Bezel
Quartz
Halogen
Spotlight
ON/OFF HIGH BEAM
spotlight switch
ON/OFF LOW BEAM
spotlight switch

CHARGING THE BATTERY

The unit is delivered in a partially charged state. It must be fully charged prior to first use by
either the AC method (preferred) or the 12 volt DC method. After initial charging, the BSL189
can be simultaneously recharged and operated (using the 12 Volt DC method only). Make sure
the 12 volt DC power source can supply minimum 15 amperes of current if the Spotlight is to
be operated while the batteries are being charged.
After charging, disconnect the Adapter from the external power source, then disconnect the
Adapter from the AC Recharge Port or 12 Volt DC Accessory Outlet.
LED Auxiliary Light On/Off
Pushbutton
LED Charging
AC Recharge Port
Indicator
WorkStand Position
Lock Knobs
(one on each side)
22
Easy Grip Handle
12 Volt DC Accessory
Outlet
Battery Compartment
Cover Lock
(one on each side)
Battery
Compartment
Adjustable
WorkStand