login_required
password
PAUSED COMMANDS
PING
ping
<ip_name_or_addr>
QUICKVC
REBOOT
RENAME
rename file
<input_file>
<output_file>
VCI - Virtual Channel Identifier
Status - link status: ACTIVE, INACTIVE or DISABLED
enables or disables CLI password protection.
The CLI password. It must consist of 1 to 8 alphanumeric (printable) characters,
inclusive.
More (or CR)
Quit
More (or CR)
output [output_filename]
count [count]
interval [interval]
timeout [timeout_value]
Sends an ICMP echo request to a remote IP host. A reply from the pinged address
indicates success.
Parameters
<ip_name_or_address>
output
count
interval
timeout
Runs the QuickVC Setup program to easily configure a virtual channel connection
(remote site profile). See Chapter 5 for a complete description of the QuickVC
Setup program.
Reboot the system. If you have made any configuration changes, be sure to save
all before rebooting. Also see the delete configuration command.
Renames files within the FLASH file system. The FLASH file system is a flat file
system (no subdirectories). Use the list files command to see what files currently
exist.
Parameters
Description
<input_file>
Name of the original file.
<output_file>
New name for the file
Continue printing
Cancel rest of output
Continue printing
Description
IP address in dotted notation, or host name of remote system.
A file name to direct output to.
Number of ICMP echo requests to send.
Number of seconds to wait between sending each request.
Number of seconds to wait for an echo response to return.
CLI Commands
B-21