System Administration; Setting Date And Time; Setting System Identification - 3Com OfficeConnect Remote 812 Cli User's Manual

System
Administration

Setting Date and Time

Setting System
Identification
Packets received from the WAN do not pass through the Bridge Firewall. Instead,
packets received from the WAN are delivered to the router or bridging function
based on their encapsulation and on the state of the MAC-Encapsulated Routing
parameter in the remote site profile.
In general, a packet received in a routed encapsulation (i.e., IPCP or Routed RFC
1483) is delivered to the router. A packet received in a bridged encapsulation is
passed on to the bridge. If MAC-Encapsulated Routing is enabled, the received
(bridge-encapsulated) packets are delivered to the router.
This section provides details and examples for performing the following system
administration tasks:
Setting Date and Time

Setting System Identification

Configuring Web Browser and TELNET Login Access


Providing TFTP Access


Setting Password Protection


Remember to save your configuration using the save all command before
rebooting your OfficeConnect Remote 812 so that your changes will be written to
permanent FLASH memory.
You can obtain the current date, time and system uptime using the command:
show date
The date and time information is provided in the following format:
System Date:
System UpTime:
You can set the date using the command: set date which sets the system date,
and leaves the time unchanged. The format is: dd-mmm-yyyy. The month should
be the first three characters of the month name. The year can be either 2 or 4
digits - 97 or 1997. Example: set date 01-JAN-1998
To set the time, use the command: set time which sets the system time, and
leaves the date unchanged. The format is: hh:mm:ss. The seconds (ss) field is
optional. Military time is used. For example, to set the time to 4:10 am enter the
command: set time 04:10 and to set the time to 4:10 pm enter the command:
set time 16:10.
The system name, location and contact information is useful when monitoring the
OfficeConnect Remote 812 remotely. You should choose a name, location and
contact that is appropriate for the unit.
You can view the settings using the command:


show system.

System Administration

02-MAR-1998 05:17:00
2d 08:37:54
6-23