Show Atm Status; Show Adsl Statistics; Show Adsl Performance; Show Adsl Transceiver_Status - 3Com OfficeConnect Remote 812 Cli User's Manual

show atm status

show adsl statistics

show adsl performance

show adsl
transceiver_status
Displays current statistics for the ATM protocol running over the ADSL WAN
interface. It lists:
Cell Delineation - Whether or not cell delineation is currently achieved.


ILMI VPI - ILMI Path Identifier used for obtaining dynamic VC's (Not


supported OfficeConnect Remote 812 1.0).
ILMI VCI - ILMI Channel Identifier used for obtaining dynamic VC's (Not


supported OfficeConnect Remote 812 1.0).
TX Cells - Number of ATM data cells sent over the WAN.


TX Idle Cells - Number of ATM idle cells sent over the WAN.


RX Good Cells - Number of well-formed and correctly addressed ATM data


cells received from the WAN.
RX Idle Cells - Number of well-formed and correctly addressed ATM idle


cells received from the WAN.
RX No Pkt Avail - Number of times a packet was reassembled but could


not be delivered over the LAN because of lack of packet memory within the
OfficeConnect Remote 812.
RX Bad VPI or VCI - Number of ATM cells received with a bad or inactive


VPI and/or VCI number.
RX Bad HEC - Number of ATM cells received with a bad ATM header.


RX Queue Full - Number of times a packet was dropped because the RX


queue was full.
Ststaistics for both near end and far end ADSL/ATM link. Counters include
corrected frames, CRC errors, and HEC errors for the Fast and Interleaved path.
Fields:
Number of link down events


Total time since system reboot (hours, minutes, seconds)


Total time since last linkdown:


Errored seconds since last link down:


Total errored seconds in 15 minutes:


Total errored seconds in previous 15 minutes:


Displays the current status of the ADSL/ATM link.
Fields:
Operational Mode: either "loss of signal" or "operational".


Attenuation Upstream


Attenuation Downstream


Noise Margin Upstream


Noise Margin Downstream


Transmit Power (ATUR)


Transmit Power (ATUC)


CLI Commands B-35