Show Ppp On Interface <Name> Counters; Counters For Ppp Bundle 1; Counters For Ppp Link; Show Ppp On Interface <Name> Settings - 3Com OfficeConnect Remote 812 Cli User's Manual

B-46 A B: CLI COMMAND DESCRIPTION
PPENDIX
show ppp on interface
<name> counters
show ppp on interface
<name> settings
Displays statistics for PPP running on the specified interface.

COUNTERS for PPP BUNDLE 1

Operational Status - not opened or opened


Number Active Links - sum of active links using this PPP bundle


Transmit Packets - sum of packets transmitted over this bundle


Bytes from Upper Layer - sum of bytes received from an upper layer


application for transmission over this bundle. This counter represents all
data handed down to the PPP application BEFORE compression occurs.
Bytes to Lower Layer - sum of bytes sent to a lower layer application for


transmission over this bundle. This counter represents all data to be handed
down to the lower layer application AFTER compression occurs.
Received Packets - sum of packets received from a lower layer application


over this bundle
Bytes to Upper Layer - sum of bytes to be handed up to an upper layer


application over this bundle
Bytes from Lower Layer - sum of bytes received from a lower layer


application over this bundle
Total Bad Headers - sum of packets with incorrect PPP Header (Address,


Control, PID Field)

COUNTERS for PPP LINK 1 - 5

Operational Status - not opened or opened


Received Packets - too long


Transmit Frames - sum of frames received from the PPP application for


transmission over this link
Bytes from Upper Layer - sum of bytes handed down from an upper layer


application for this link
Bytes to Lower Layer - sum of bytes received from a lower layer


application for this link
Received Frames - sum of frames received on this link


Bytes to Upper Layer - sum of bytes handed up to an upper layer


application over this link
Bytes from Lower Layer -sum of bytes received from a lower layer


application over this link
Displays the settings for PPP on the specified WAN interface.

SETTINGS for PPP BUNDLE 1

Operational Status - opened or not opened


Number Active Links - number of links active on this PPP bundle


User Profile - user whose parameters were used in creating links


Local MMRU - MRU the remote entity uses when sending packets to local


PPP entity. Default: 1514