Add Network Service Example; Add Snmp Community <Community_Name; Add Snmp Trap_Community <Name - 3Com OfficeConnect Remote 812 Cli User's Manual

Release 1.0
Hide thumbs Also See for OfficeConnect Remote 812:
Table of Contents

Advertisement

B-8
A
B: CLI COMMAND DESCRIPTION
PPENDIX
add snmp community
<community_name>
add snmp
trap_community
<name>
socket
Indicates which "socket" the server listens on. For TFTP and TELNET, it is the
TCP or UDP port #.
enabled
This indicates whether the network service is enabled. Enter YES or NO.
data
Ancillary Data. This field contains server-specific configuration data. See the
table on the next page for settable ancillary data parameters for TELNET.
close_active_
Indicates whether or not to close any active connections when a service is
disabled by the disable network_service command. Default: FALSE.
connections
The table below shows configurable parameters for TELNET services, which are
specified with the data parameter.
Ancillary Data
Description
Parameters
auth
On indicates that login/password authentication should be performed on
incoming connections.
Default: on.
Format: auth=[on/off]
login_prompt
ASCII string specifying the login prompt to be sent during authentication.
It must be quoted.
Default:
Format: login_prompt=[string]
login_banner
ASCII string sent to a client when the connection is made. It must be
quoted. Default: none.
Format: login_banner=[string]

Add network service example:

To configure a TELNET service to offer CLI access on port 23, doing authentication
upon connect:
add network_service CLI_access server_type TELNETD socket 23
address [IP_address]

access [RO | RW]

Adds to the list of SNMP authorized users. The community name and IP address of
SNMP requests from managers on the network must match the list, which you can
see using list snmp communities.
Parameters
Description
<community_name>
Group name that authorizes SNMP requests.
address
IP address of the SNMP manager, in the form nnn.nnn.nnn.nnn
access
Determines what type of access to SNMP MIBs the added user will have.
Options: Read Only (RO) and Read Write (RW).
address <IP_address>

l ogin: "
"

Advertisement

Table of Contents
loading

Table of Contents