Settings For Ppp Link 1 - 5 Authentication; Show Ppp Settings; Show Security_Option Settings; Input Counters - 3Com OfficeConnect Remote 812 Cli User's Manual

B-48 A B: CLI COMMAND DESCRIPTION
PPENDIX

show ppp settings

show security_option
settings

show snmp counters

SETTINGS for PPP LINK 1 - 5 AUTHENTICATION

Operational Status - not opened or opened


Local To Remote Compression Protocol - authentication protocol used


by the local PPP entity when it authenticated the itself to the remote PPP
entity, PAP is the default
Remote To Local Compression Protocol - authentication protocol used


by the remote PPP entity when it authenticated the itself to the local PPP
entity, PAP is the default
Displays global settings for PPP. You can modify inbound authentication using the
set ppp receive_authentication command.
Inbound Connections Authenticate PAP or CHAP - Choices are: CHAP,


PAP, EITHER or NONE. PAP is the default
Displays status for SNMP User Access and Administration by Remote Users. You
can modify the SNMP User Access using the enable or disable security_option
snmp commands. You can modify Administration by Remote User using the
enable or disable security_option remote_user commands.
SNMP User Access - ENABLED (default) or DISABLED


Administration by Remote User - ON or OFF


Displays many SNMP statistics.

INPUT COUNTERS

Packets - number of SNMP packets received


Bad Versions - SNMP messages for an unsupported SNMP version


Bad Community Names - SNMP messages which used an unknown SNMP


community name
Bad Community Uses - SNMP messages which represented an SNMP


operation not allowed by the SNMP community named in the message
ASN.1 Parse Errors - sum of ASN.1 or BER errors


Too Big Errors - SNMP PDUs for which the value of the error-status field is


tooBig'
No Such Name Errors - SNMP PDUs where error-status field is


`noSuchName'
Bad Value Errors - SNMP PDUs where error-status field is `badValue'


Read Only Errors - SNMP PDUs where the error-status field is `readOnly'


General Errors - SNMP PDUs where the error-status field is `genErr'


Total Request MIB Objects - sum of MIB objects retrieved successfully as


the result of receiving valid SNMP Get-Request and Get-Next PDUs
Total Set MIB Objects - sum of MIB objects altered successfully as the


result of receiving valid SNMP Set-Request PDUs