Show Adsl Version; Show Bridge Network <Name; Show Bridge Settings; Show Call_Log - 3Com OfficeConnect Remote 812 Cli User's Manual

B-36 A B: CLI COMMAND DESCRIPTION
PPENDIX

show adsl version

show bridge network
<name>

show bridge settings

show call_log

Actual Negotiated Downstream Baud Rate:


Actual Negotiated Upstream Baud Rate:


Fields:
ADSL hardware release version: 0x3530


ADSL Alcatel chipset firmware release version: 141


counters [Received Frames, Transmit Frames, Discarded]


settings [Interface, Network Address, Frame Type, Status, User Name,


Spanning Tree Enabled]
Parameters Description
counters Displays information about the specified bridge network. It lists:
Received Frames - packet frames which have been received
Transmit Frames - packet frames which have been sent
Discarded - packet frames which have been thrown away
settings Displays information about the specified bridge network. You use add bridge
network to define bridge networks.
Interface - the interface this bridge is using
Network Address - index number for this bridge network
Frame Type - BRIDGE is the default
Status - ENABLED or DISABLED are options
User Name - user to supply parameters for this bridge
Spanning Tree Enabled - ENABLED or DISABLED
Displays the settings for all bridge networks. Use set bridge to modify these values.
Base Aging Time - time to age out a known MAC address, default 300


Spanning Tree Forward Delay - delay after coming up before learning,


default is 15
Spanning Tree Priority - this bridge's bid to be root bridge, default is


32768
Access MACs Only - This can be enabled or disabled.


Spanning Tree Mode - sets spanning tree algorithm on. Default is


DISABLED
Base MAC Address - address of the bridge


Number of Networks - number of networks in this bridge


Type - type of bridge: TRANSPARENT_ONLY is the default


Displays the current call status of a specified VC.
Fields:
Call State: current call state of the call (i.e. Disconnected, Connecting,


Connected).