Set Vc <Vc_Name> Atm; Show - 3Com OfficeConnect Remote 812 Cli User's Manual

B-34 A B: CLI COMMAND DESCRIPTION
PPENDIX
set vc <vc_name> atm

SHOW

rip_policies Allows VC to enable or disable RIP policies. See text on the preceding
_update page for description of keywords. A keyword with a NO_ in front is used
to disable the policy. Default is indicated by (D).
SEND_DEFAULT/NO_SEND_DEFAULT(D)
SEND_ROUTES(D)/NO_SEND_ROUTES
SEND_SUBNETS/NO_SEND_SUBNETS(D)
ACCEPT_DEFAULT/NO_ACCEPT_
DEFAULT(D)
SPLIT_HORIZON(D)/NO_SPLIT_HORIZON
POISON_REVERSE(D)/NO_POISON_
REVERSE
FLASH_UPDATE(D)/NO_FLASH_UPDATE
SEND_COMPAT(D)/NO_SEND_COMPAT
RIPV1_RECEIVE(D)/NO_RIPV1_RECEIVE
RIPV2_RECEIVE(D)/NO_RIPV2_RECEIVE
SILENT (default is disabled)
send_name An identification name sent to the remote network.
send_password Password sent to the remote network. Limit: 15 characters.
Type Describes type of connection. Options:
ONDEMAND - makes connection when the system needs a session with
the remote network.
CONTINUOUS - keeps connection up all the time
MANUAL - manually starts connection using the CLI
bt [number]


category_of_service [Unspecified (UBR) | Variable (VBR)]


pcr [number]


scr [number]


type [PVC | SVC]


vci [number]


vpi [number]


Sets ATM parameters for VCs.
Parameters Description
<vc_name> VC profile name.
Bt Burst Tolerance (VBR only).
Category_of_service Select either Unspecified (UBR) or Variable (VBR).
Pcr Peak Cell Rate (both UBR and VBR).
Scr Sustained Cell Rate (VBR only).
Type This designated a virtual circuit as either a Switched Virtual Circuit (SVC)
or a Permanent Virtual Circuit (PVC).
Vci Virtual Channel Identifier.
Vpi Virtual Path Identifier.
Show commands display details about system entities.