Installation
Power Save Mode
After a period of waiting (to refer the period length see chapter OSD menu / DPMS) for an incoming si-
gnal the monitor automatically switches to the POWER SAVE mode in two steps.
Suspend Mode
The first step of saving power is the SUSPEND mode. After a default five seconds period of waiting for
an incoming signal, the micro processor switches the backlight down to a minimum brightness value.
The screen becomes darker.
Power Down Mode
The second step of saving power is the POWER DOWN mode. Waiting for another fifteen seconds
(default period), the micro processor switches the backlight off and stops processing for video si-
gnals. The screen becomes black and the power indicator LED at the front is still illuminated.
Power Save Wake Up
When the POWER SAVE mode is activated, a wake up will happen automatically when the internal mi-
cro processor recognize a video signal at the selected input.
The monitor comes back on and the incoming signal will be shown on the screen.
© 02.07 TAMUZ - LCD Video Monitors
LSM Digital Broadcast Monitor
SPARROWHAWK
Page - 22 -