Submenu Hd Output - Mode Search - TAMUZ LSM 124W Operation Manual

Main Menu
The default mode for clock rate is AUTO, so the interface detects the clock rate from the input signal
automatically. If it's set to a fixed frequency, this clock rate may not correspond to the incoming signal
and the screen will be dark.
Close and save this menu step by pushing the MENU key once.
Submenu HD Output – Mode Search
Select the MODE SEARCH MENU from the INPUTS – FORMAT – HD OUTPUT MENU with the UP and DOWN
keys and open the menu step with the PLUS (V+) key.
The MODE SEARCH MENU shows following operational steps to select a video format:
HD Output
Format
Standard
Clock
Pattern
CRC off
Rate Select
Mode Search
Sync Error
CRC Error
Sync
The default mode for mode search is NORMAL, so the interface detects the input signal automatically
under normal reacting speeds. When set to SLOW, reacting time is longer and glitches within the si-
gnal will be ignored.
Close and save this menu step by pushing the MENU key once.
© 02.07 TAMUZ - LCD Video Monitors
Note: The Rate Select mode works similar like an external sync switch. Only in AUTO mode
the clock rate will be taken from the incoming signal.
Format
Testpattern
1080i 29.97
SMPTE 274M
74,17 MHz
SMPTE
Auto
Normal
4
0
255
Note: In case of disturbed or corrupted incoming signals set the MODE SEARCH to SLOW.
Format
Normal detects the incoming format automatically within a
Slow detects the incoming format automatically within a slow
reacting speed, so glitches will be ignored
LSM Digital Broadcast Monitor
SPARROWHAWK
Help
normal reacting speed
Page - 44 -