Table of Contents
Advertisement
Connections of the Monitor
VGA Input
As standard the LSM 1xxW HD of the SPARROWHAWK series is equipped with an analog graphic si-
gnal port, known as VGA port.
Connect your VGA graphic source using standard Sub-HD15 cables to the input ports at the rear of
the monitor.
This port accepts all common or uncommon analog graphic signals regarding his MultiFormat Mul-
tiSync capability. For supported formats check the chapter VGA Formats in the service section.
Ethernet IP Interface
As added option TAMUZ SPARROWHAWK series models may have an Ethernet IP port built-in at
the rear. SPARROWHAWK series monitors equipped with this IP addressable interface port allows
to communicates via a PC network, see MRC software.
The pin-out of the Ethernet RJ45 port is shown in following table:
The image above shows the RJ45 port. There are two standards used for Ethernet cabling, TIA-568A
and TIA-568B. Both are usable for a network to control the TAMUZ monitors.
Pin
The IP port is standard at all SPARROWHAWK LSM 1xxW series monitors.
© 02.07 TAMUZ - LCD Video Monitors
Function
1
Clear to send
2
Date send ready
3
Receive Data
4
Ground
5
Ground
6
Transmit Data
7
Data Termina Ready
8
Request to send
Color Code 568A
Color Code 568B
LSM Digital Broadcast Monitor
SPARROWHAWK
Page - 28 -
Hide quick links:
Advertisement
Table of Contents
