Table of Contents
Advertisement
Connections of the Monitor
Video Inputs at Version LSM 1xxW HD
The version LSM 1xxW HD of the SPARROWHAWK series was designed for serial digital component
(SDI) signals and serial digital High-Definition (HD-SDI) signals in the formats 1080i, 1035i, 24/25sf
and 720p, or VGA graphic signals.
Connect your video source using standard 75 Ohm BNC cables to the input ports at the rear of the
monitor. The inputs are internally 75 Ohm terminated. There is no need for an external standard 75
ohm terminating resistor. Connect your VGA graphic source using standard Sub-HD15 cables to the
input ports at the rear of the monitor.
DVI Inputs
Depending on the version of the device the allocation of the ports varies. The respectively DVI jack is
described as input.
The allocation of the ports is shown in following table:
Model / Interface
Type
LSM 1xxW HD
SPARROWHAWK HD
Connect your DVI graphic source using standard DVI-D cables to the input ports at the rear of the mo-
nitor.
This port accepts all common or uncommon analog graphic signals regarding his MultiFormat Mul-
tiSync capability. For supported formats check the chapter VGA Formats in the service section.
Optional Input CCVS
As an option of the LSM 1xxW HD of the SPARROWHAWK series a pair of BNC ports is defined as
CCVS input, left as input 1 and right as input 2. This option has been equipped when ordered.
Signal Format
The video monitor SPARROWHAWK LSM 1xxW HD series are designed as a MultiFormat and Mul-
tiSync monitor to be used with signals in the format SD and HD, regardless of the format.
As standard the integrated signal processor recognizes the video format automatically and adapts it-
self to this correspondingly. The picture aspect ratios should be adapted by adjusting H and V size to
the video screen size if necessary (service available under service conditions only).
Usually the wide screen monitor type shows a full screen picture every time feeding 16:9 images. In
case of a 4:3 aspect ratio image, select the 4:3 mode using the OSD menu step GEOMETRY.
For faster operation the button 16:9 / 4:3 opens the menu step directly.
© 02.07 TAMUZ - LCD Video Monitors
Name
Format
Graphics / HD
Input 1
Input 2
Input 3
CCVS
CCVS
DVI
LSM Digital Broadcast Monitor
SPARROWHAWK
Input 4
Input 5
Input 6
HDSDI
HDSDI
VGA
Page - 26 -
Hide quick links:
Advertisement
Table of Contents
