Submenu Format For Vga Inputs - TAMUZ LSM 124W Operation Manual

Main Menu

Submenu Format for VGA inputs

Select the FORMAT MENU from the INPUT MENU with the UP and DOWN keys and open the menu step
with the PLUS (V+) key.
The FORMAT MENU shows following operational steps when input VGA 1 or VGA 2 is selected:
INPUTS
CCVS 1
CCVS 2
Y/C
CAV
SDI 1
SDI 2
HD SDI 1
HD SDI 2
VGA 1
VGA 2
DVI
Format
Close and save this menu step by pushing the MENU key once.
© 02.07 TAMUZ - LCD Video Monitors
Format
Auto Sync Detect
HV Sync
Composite Sync
Sync on Green
C-Sync Filter
Edge
Coast lines
SoG Level
H-Clamp
2
Note: Best format mode to operate the monitor is AUTO. When AUTO is enabled, the
incoming signal will be automatically recognized and the monitor automatically configured to
display the correct format.
Note: In case of SoG signals the selections Edge, SoG Level and H-Clamp helps to adjust the
monitor to uncommon signals to display the graphic video correctly.
enables the auto-detection of the video standard
enables the mode separated H and V sync
enables the mode composite sync
enables the mode sync on green
Off enables the composite sync filter
1st selects the edge to trigger the sync
7
selects how many lines to detect for sync
-170 mV selects the value of the sync on green level
8
selects how many frames to detect a new sync
LSM Digital Broadcast Monitor
SPARROWHAWK
Help
Page - 47 -