Submenu Signal For Sdi Inputs; Submenu P-I Interlaced For Sd-Sdi Signals - TAMUZ LSM 124W Operation Manual

Main Menu

Submenu Signal for SDI inputs

Select the SIGNAL MENU from the SCALING MENU with the UP and DOWN keys and open the menu step
with the PLUS (V+) key.
The SIGNAL MENU shows following operational steps when SDI input is selected:
SCALING
4 : 3
16 : 9
14 : 9
1 : 1
2 : 1
Full Screen
Scan Mode
Mirror
Signal
Display
Zoom
Reset
Close and save this menu step by pushing the MENU key once.

Submenu P-I interlaced for SD-SDI Signals

Select the P-I MENU from the SIGNAL MENU with the UP and DOWN keys and enable the menu step
with the PLUS (V+) key.
© 02.07 TAMUZ - LCD Video Monitors
Signal
x-Position
y-Position
Pixel
Lines
P-I
2
Off
2
2
2
8
Note: The processing mode effects the vertical resolution of interlaced footage. Select
carefully the best processing mode by toggling through the modes.
Note: The monitor stores and remembers the selected de-interlacer mode for the specific
signal and select this mode when the signal is detected next time.
Note: The iFilm mode is the factory default setup for interlaced SD signals
0 Adjust the horizontal image position on the screen.
Note: Selecting this menu step with the PLUS (V+) or
MINUS (V-) key for an individual setting. The value is limited
to the maximal TV line width.
-16 Adjust the vertical image position on the screen.
Note: Selecting this menu step with the PLUS (V+) or
MINUS (V-) key for an individual setting. The value is limited
to the maximal TV frame width.
1920 Adjust how many pixels becomes sampled horizontally.
Note: Selecting this menu step with the PLUS (V+) or
MINUS (V-) key for an individual setting. The value is limited
to the maximal TV line width, regarding to the TV standard
(best for PAL is 940 samples).
1080i Adjust how many lines becomes sampled horizontally.
Note: Selecting this menu step with the PLUS (V+) or
MINUS (V-) key for an individual setting. The value is limited
to the maximal TV frame lines, regarding to the TV standard
(best for PAL is 576 lines).
iFilm Selects the mode for interpolation of interlaced signals.
iSport = best for fast moving footage
iFilm = best for slow moving footage
p = for progressive footage only
sf = good for interlaced footage
LSM Digital Broadcast Monitor
SPARROWHAWK
Help
Page - 55 -