Viewing Dvr Outside Of Your Network - Defender SN301-8CH Instruction Manual

NETWORK GUIDE
VIEWING YOUR DVR OUTSIDE OF YOUR NETWORK
Now that you have successfully viewed your DVR and cameras from a computer connected to the same router it is time
to set up your router to view the DVR while at a remote location. This process is called "Port Forwarding" and you can
find detailed instructions on how to complete the required steps at:
Option 1
www.defender-usa.com/network
Option 2
www.portforward.com
BEFORE YOU BEGIN PORT FORWARDING YOU WILL NEED:
 The DVR connected to a router
 Your computer hooked up to the same network/router as the DVR
 The brand and model number of your router (this is usually located
on the back or bottom of the router)
 Internet Explorer 6.0 or higher
 The Internal IP address of your DVR
 The port and web port numbers that the DVR is programmed to
run off of. To view what ports are being used with your DVR see
the network setup menu on your DVR.
Note: Port forwarding is required if you want to view the DVR from a computer that is not
connected to the same router.
SN301-8CH
55