Playback Through Dvr - Defender SN301-8CH Instruction Manual

PLAYBACK
Playback Screen

Playback Through DVR

Once you have selected the footage you would like to view, press select and the footage will automatically play. Upon
playing back the recorded footage, options on the bottom of the screen appear for you to manipulate the video. These
options are also accessible though the front panel on the DVR as well as on the remote control.
The options and their functions are as follows: (from left to right on the screen)
1. Rewind: Pressing this rewinds the footage, the more times you press this the faster the footage will
rewind (x2, x4, x8).
2. Slow Forward: Pressing this button slows down the playback footage. The more times you press this, the
slower the video will playback.
3. Play:
Footage plays automatically when selected from the playback menu, so pressing this button
will play the footage if it is paused, rewinding or fast forwarding or stopped. (1/2, 1/4, 1/8 or
normal speed)
4. Pause/Forward: Pressing this button once will pause the playback footage. After that, each time you press
this button the playback footage will move forward a frame and pause again.
5. Fast Forward: Pressing this fast forwards the footage, the more times you press this the faster the footage
will fast forward (x2, x4, x8).
6. Mute: Selecting this option will mute the sound from the playback footage. Sound will only play
though if you have an audio supported camera (not included) hooked up to your DVR.
7. Volume Adjust: Adjusting this bar (from low to high) will adjust the volume of the sound from the playback
footage. Sound will only play if you have an audio supported camera (not included) hooked up
to your DVR.
8. Exit:
Selecting this option will exit the playback footage and return you to the playback search or
file list option.
SN301-8CH
43