Hdd - Defender SN301-8CH Instruction Manual

MAIN MENU

HDD

This menu option gives you information about your HDD (Hard Disk Drive), allows you to enable overwrite mode, and
format the hard drive and/or USB drive.
The information that this option gives you includes:
• HDD Status:
• Total Space:
• Free Space:
• Usable Rec Time: Amount of remaining time available to record
HDD Menu
Overwrite
When the HDD has overwrite enabled, it will record over the oldest footage once the HDD fills up instead of stopping
the recording, this way the DVR is always recording. If you want to stop recording when the HD is full, set overwrite
to "Disable".
To Enable/Disable overwrite mode:
1. Select the drop down menu beside "Overwrite".
2. Select either "enable" to turn overwrite on or "disable" to turn overwrite off.
3. Select "apply" to save settings.
SN301-8CH
Displays the current operating status of the hard drive. If the Hard Drive is functioning
normally it will display "OK"
Tells you how much space you have altogether on your HDD
Tells you how much space you have available to record on the HDD before all the HDD
space is used up
28