Network Guide; Requirements; Connecting Dvr To A Router - Defender SN301-8CH Instruction Manual

NETWORK GUIDE

REQUIREMENTS

You will need to have:

The DVR connected to a router

The router connected to the Internet

A PC or laptop that is connected to the same router as the DVR. The PC can be
connected by a wired or wireless connection

Internet Explorer 6.0 or higher (to check your version of Internet Explorer
open I.E. In the top Menu bar select "Help" and then select "About Internet
Explorer". The version of I.E. will be displayed.)

A genuine and fully updated version of Windows XP, Vista or newer
Note: The computer and DVR need to be connected to the same router for initial setup. A computer will
not always be necessary at the location to view the DVR.

CONNECTING DVR TO A ROUTER

1. Power off the DVR by removing the power
cable from the back of the DVR.
2. Connect the included network cable to the
back of the DVR in the Ethernet port (LAN).
3. Connect the other end of the network cable
to an available port on the router.
4. Power on the DVR by reconnecting the
power cable to the back of the DVR.
SN301-8CH
50