Network Setup Menu - Defender SN301-8CH Instruction Manual

ONLINE SOFTWARE
PTZ Setup
PTZ setup allows you to input information for the connected PTZ camera. (PTZ cameras not included). The information
must be setup according to the PTZ camera so that the DVR and online software works with your PTZ camera and all
its functions.
To input the PTZ information:
1. Find which camera channel the PTZ camera is hooked up to and from that row, select the proper information for
each PTZ camera connected from the drop down menu on your DVR.
2. The information to select should be specified in the PTZ manual.
3. Once all the correct information is inputted into the online software, select "apply" to save changes.

NETWORK SETUP MENU

The network setup menu is your gateway to viewing your footage online. This menu holds the information you need
about your DVR to set up on-line viewing. As you have already set up your networking viewing, the network menu can
be used for reference purposes. The options and selections in this network setup menu are the same as the network
menu on your DVR. For more information on your network menu and what it consists of please see "Network Setup
Menu" on page 22 of this manual.
SN301-8CH
72