Getting Started; Using The Mouse - Defender SN301-8CH Instruction Manual

GETTING STARTED

GETTING STARTED
Now that you have powered up the DVR and properly connected it to a TV or monitor you are ready to begin setting
up and using the DVR. This DVR is designed to be user friendly. You will notice the coaching iMenu information
bubbles describing settings that you will find in the menu. As an added convenience the DVR will automatically begin
recording once it is powered on as long as at least one camera is properly connected.

USING THE MOUSE

• The included USB mouse makes using the SN301-
8CH simple and efficient. Using the mouse will
make controlling the DVR very similar to using a
computer. It will allow you to easily click on items to
select them and make desired changes. The mouse
is not necessary for operation
Make sure that the mouse is connected to the top USB port on
the back of the DVR before powering on.
SCREEN VIEWING
By double clicking one of the eight camera screens, the viewing mode will switch to full screen mode. Double clicking
again will bring you to back to quad screen or eight screen mode. (depending on what was set before) From full screen
mode you can zoom into an area of the screen. For more information on zooming in, please see "zoom" on page 14.
Full Screen
Eight Camera Screen
SN301-8CH
Quad Screen
Zooming in
11