File Viewing - Defender SN301-8CH Instruction Manual

PLAYBACK
→
→
→
Note: "Open Local Dir" works the same as Open Local Disk and Open Remote Device only works if the
device is directly connected to computer, which is not supported on this device.
SN301-8CH

File Viewing

Be sure that the playback software is open on your
computer. Instructions differ depending on what files you
would like to open and play:
One Video
1. Select "File" →"Open Local File". Find the USB device
file, or any other area where backed up footage
would be stored on your computer.
2. Make sure to view . 264 Files.
3. Select the file you would like to view and
select "open".
4. Once you have selected open, the video will NOT play
automatically. You must prompt the video to play.
5. To view the footage you must select "play", from the
top menu and then scroll down and select "Play"
from there. Once "play" is selected, the video will
begin to play.
An Entire Folder
1. Select "File"→ "Open Local Disk". Find the USB
device file.
2. Select the file you would like to view and
select "open".
3. Once you have selected open, the video does NOT
play automatically. You must select "play".
4. To view the footage you must select "play". To do this
open the top menu and then scroll down and select
"play". Once "play" is selected, the video will begin
to play.
Multiple Folders
1. Select "file" → "Open Multiple Disk", then select the
folders you would like to view and select "OK".
3. Once you have selected open, the video does NOT
play automatically. You must select "play".
4. To view the footage you must select "play". To do this
open the top menu and then scroll down and select
"play". Once "play" is selected, the video will begin
to play.
45