Table of Contents
Advertisement
SETUP WIZARD – STORAGE MANAGE
Formatting your Hard Drive helps to enhance the performance of your NVR. We recommend doing this before the startup
Wizard is completed.
Please Note: When formatting your NVR after the Startup Wizard, all recorded footage will be deleted.
•
To format your Hard Drive, check the Format box > Click Format.
•
Select Yes to "All the records will be deleted. Are You Sure To Continue?"
•
Wait for the hard drive to finalize formatting. This may take a few moments. Do not navigate away from the screen.
•
Click "OK".
•
Confirm your Status is "Formatted". Click "Next".
SETTING UP REMOTE VIEWING
SETUP WIZARD – MOBILE ACCESS
In this section, you will connect the NVR and cameras to the Defender Empower App to gain mobile App access for
remote viewing. In order to use the Defender Empower App, the NVR must be connected to the Internet via an
Ethernet cable.
•
Open your camera and scan the DEFENDER EMPOWER APP QR Code on your NVR Screen to download the App
for remote access viewing. If you are unable to scan the QR code, search Defender Empower in the App Store
or the Google Play Store.
Please Note: STAY ON THIS SCREEN. The Device ID QR Code can only be scanned within the Defender Empower App.
Continue to the next section "Account Setup" and follow the steps to create an account. You will be instructed to
scan the Device ID QR code in upcoming steps.
•
An email account is required
for verification.
6
Need Help? Visit DefenderCameras.com/support
THIS IS THE DEFENDER
EMPOWER APP QR CODE.
SCAN QR CODE FROM NVR
SCREEN ONLY.
Advertisement
Table of Contents
