Build The Virtual Array; View System Performance In Enlighten - enphase Envoy Installation And Operation Manual

10. Build the Virtual Array

When the system is energised and the Envoy detects at least one microinverter, create the virtual array
in Enlighten from the installation map
you created.
You can scan and upload the paper
copy of the Installation Map, or you
can use the ArrayGun feature from the
Enphase Installer Toolkit to easily build
and configure a system. Refer to
http://enphase.com/products/arraygun/
for more information.
To build the virtual array manually:
a. Log in to Enlighten.
b. Use Array Builder to create the
virtual array in Enlighten.
c. Use your installation map as
your reference.
To see the Array Builder demo, go to
http://enphase.com/support/videos/.
Once the virtual array is built, Enlighten displays a graphic representation of the PV system. It also shows
detailed current and historical performance information.

11. View System Performance in Enlighten

Once the array is built and the system is activated, you can log in to Enlighten to view site data.
a. If you have not done so already, log in to Enlighten to view system data.
b. Refer to "How the Envoy Works with Enlighten" on page 27 for more information.
17
 2014 Enphase Energy Inc.
Envoy Installation and Operation
141-00014 Rev 04