Build The Virtual Array - enphase Envoy Installation And Operation Manual

l. Use your browser to send this report to your printer or to save it to a file.
After printing or saving the file, you can send it to the local regulatory agency
to confirm the grid profile and trip point settings.
The report will look like the following example.

11. Build the Virtual Array

When the system is energized and the Envoy detects all the installed microinverters,
you can create the virtual array in Enlighten from the Enphase map you created.
Once the virtual array is built, Enlighten displays a graphic representation of the PV
system. It also shows detailed current and historical performance information.
Please go to www.enphase.com for more information on the Enphase Enlighten web-
based monitoring and analysis software.
a. Scan the paper installation map and upload it to the Activation form
online.
b. Log in to Enlighten and use Array Builder to create the virtual array in
Enlighten. Use the paper map created in step 9 as your reference.
NOTE: Go to
Array Builder demo.
c. If you do not already have an account, please go to www.enphase.com
and click "Enlighten Login" to register.
15
http://www.enphase.com/support/learningcenter
Copyright 2011 Enphase Energy
to view an
141-00014 Rev 01
e
n
g
l
i
s
h