Using Enlighten To Check Envoy Status - enphase Envoy Installation And Operation Manual

Using Enlighten to Check Envoy Status

To check status of Enphase equipment, do the following:
1. Log on to Enlighten to view the array. Click Devices.
A list of equipment appears including the Envoy(s) and all of the microinverters that the Envoy
has detected. The column on the far right lists the status of each microinverter.
2. To view status information for the Envoy, click the Envoy serial number.
3. This screen indicates status for web communication, power line communication and
microinverter count.
4. From here you can choose to Check Signal Strength or Rescan for Devices as needed. When
checking signal strength, allow up to 15 minutes for a response.
28
 2014 Enphase Energy Inc.
Envoy Installation and Operation
Click here to
Check
Signal
Strength
Click here to
Rescan for
Devices or to
Stop Device
Scan
141-00014 Rev 04