Build The Virtual Array; View System Performance In Enlighten - enphase Envoy Installation And Operation Manual

8. Build the Virtual Array

When the system is energized and the Envoy detects at least one microinverter, the installer can
create the virtual array in Enlighten from the installation map. To build the virtual array:
Log in to Enlighten.
a.
Use Array Builder to
b.
create the virtual array in
Enlighten.
Use your installation map
c.
as your reference.
To see the Array Builder demo, go to
http://enphase.com/support/videos/.
Once the virtual array is built,
Enlighten displays a graphic
representation of the PV system. It
also shows detailed current and
historical performance information.

9. View System Performance in Enlighten

Once the array is built and the system is activated, the installer and the system owner can log in to
Enlighten to view site data.
If you have not done so already, log in to Enlighten to view system data.
Refer to "How the Envoy Works with Enlighten" on page 27 for more information.
17 Copyright  2012 Enphase Energy
Envoy Installation and Operation
141-00011 Rev 04