Administration Screen
The Administration screen of the Envoy local interface contains several configurable options. Click
Administration to access this menu.
NOTE: For Envoy performance reasons, Enphase does not recommend giving the Envoy a
publicly accessible IP address. However, if you must place the Envoy on a public-facing IP
address, Enphase recommends that you change the Administration password to disallow
unauthorised modification to your Envoy. (This situation is rare, since consumer-grade
routers normally provide the Envoy with an internal network IP address that is not
publicly accessible.)
For reference, your private/internal IP address space will be in the 192.168.x.x,
172.16(-31).x.x, 10.x.x.x or 169.254.x.x range. If you are unsure if your Envoy is on the
public Internet, contact your network administrator or Internet Service Provider.
The default login credentials for the Administration menu are:
Username: admin
Password: admin
Administration Screen Tasks
The following sections describe several Administration Screen tasks. Perform these tasks only when
needed. Administration tasks include:
Set or Change the Grid Profile
Set Up Device Scan Control
Set Time Zone
Other Administration Tasks
39
2014 Enphase Energy Inc.
Envoy Installation and Operation
141-00014 Rev 04