Bombardier-Rotax FR 125 MAX FR 125 Junior MAX Installation And Operator's Manual page 74

Installation Instructions FR 125 MAX and FR 125 Junior MAX
Screw the thermo-sensor into cylinder head cover so that only one thread course on
the thermosensor remains visible from the outside (curing time at 20
approx. 3 hours.)
Attention: The tip of the temperature sensor must not touch the combustion chamber insert.
Contact on the insert could result in damage or malfunction of thermo-sensor and
instrument.
Open the cover on the instrument for plug connection of thermo-sensor.
Plug the thermo-sensor into the instrument.
Attach cable of the thermo-sensor with cable ties on the chassis.
Attention: The cable of the thermo-sensor must be free of tensile stress. Stress could result in
damage or malfunction of the thermo-sensor and instrument.
Note: Refer to Operator's Manual for limits of operation regarding coolant temperature.
Warning: Before engine operation, read the Operator's Manual.
Seite/page 74/108
o o
C (70 F)
Ausgabe/edition 09.2003