Installation Of The Battery - Bombardier-Rotax FR 125 MAX FR 125 Junior MAX Installation And Operator's Manual

Installation Instructions FR 125 MAX and FR 125 Junior MAX

7. Installation of the battery

For a well balanced weight distribution we recommend to locate the battery either on the left side
behind the driver seat or in front of the fuel tank. For the proper attachment of the battery on the
chassis ROTAX supplies a fixture kit included in the engine delivery volume (see fig. 5, pos. 20).
Attach the battery fixture (20) with the two pipe clamps (16 – 19) on a suitable
location on the chassis.
Note: The clamp size (16) is planned for chassis tubes of 32 mm / 1 ¼ " dia. On tubes of a
smaller dia. compensate with layers of emery paper.
Attention: Do not overtighten the screw (18) of the pipe clamps (16). Risk of clamp fracture.
Put the rubber plate (21) inside the battery fixture.
Put the battery into the fixture (20). For connecting the battery refer to section 19.
Warning: Make absolutely sure to avoid short-circuiting of the battery terminals. A short circuit
would ruin the battery and could lead to explosion of the battery.
Seite/page 63/108 Ausgabe/edition 09.2003