Turning On The Power Switch/Auto Job Start; Turning On The Power Switch/Auto Job Start - Toshiba FC15 Operator's Manual

3. TURNING ON THE POWER SWITCH / AUTO JOB START
Turning ON the Power Switch
1
Turn ON the power switch.
● The following message appears.
Wait Warming Up
2
About 9 minutes later, the message
"READY" appears.
● This message indicates that you can make
copies at any time.
● If this message appears:
If the copier has not been used for a long
time, the copier automatically goes into the
adjustment mode and the message on the
right appears before warming up.
It will soon start working.
Do not turn OFF the power. Just wait for
a while.
Wait
Performing Auto Calibration
21