Network - Konica Minolta magicolor 2200 DeskLaser Installation Manual

Chain Inputbins
This menu item is available only if an optional media cassette is installed.
Menu Engine/Chain Inputbins
Purpose Allows you to "chain" cassettes (inputbins) so that when the first cassette empties, the printer
automatically draws media from the other cassette.
Choices On—Switch to the next cassette with the same size and type of media when the default cas-
sette is empty.
Off—Don't switch cassettes; use only the default cassette.
Default On
Chain Outputbins
This menu item is available only if an optional 5-bin mailbox is installed.
Menu Engine/Chain Outputbins
Purpose Allows you to "chain" mailbox bins (outputbins) so that when the first bin fills, the printer auto-
matically sends output to the next available bin.
Choices On—Switch to the next available bin when the default bin is full.
Off—Don't switch bins; use only the default outputbin.
Default Off

Network

The following menu items allow you to configure your printer for connection to your network.
IP (Internet) Address
The IP Address menu allows you to set the printer's network (Internet Protocol) address. The
address is in the format xxx.xxx.xxx.xxx.
Menu Network/Internet address
Choices Each xxx . xxx . xxx . xxx triplet can have a value of 001–254.
Default 161.033.128.024
Notes This address must be set, and it must be unique.
Once you save your changes to this menu, the printer automatically reboots.
The address must consist only of numbers and periods. Selecting a letter or another symbol
results in an error message.
All xxx values must be three digits (for example, 1 is entered as 001, and 10 is entered as 010).
HW (Hardware) Address
The HW Address menu allows you to view the printer's factory-default Ethernet hardware
address.
Menu Network/HW address
Choices None (read-only)
Default The printer's hardware address in the form HW:080086 xxxxxx
16 Configuration Menu Overview