Table of Contents
Advertisement
8
Remove the tape holding the toner cartridge carousel in
place.
9
Remove the piece of foam attached to the front of the
toner cartridge carousel.
Installing the Waste Toner Pack
The waste toner pack collects the excess toner remaining on the OPC drum cartridge.
1
Remove the waste toner pack from its plastic shipping bag.
2
Make sure the transfer belt unit left release lever is still set to its correct (2 o'clock)
position.
If the transfer belt unit left release lever is at its top (12 o'clock) position or the laser lens
cover is not firmly seated, the waste toner pack cannot be installed.
3
Press the bottom of the waste toner pack into the printer
first, then the top, until it is firmly seated.
4
Close the front cover.
Use both hands to avoid putting uneven strain on the
cover hinges.
Setting up Your Printer
5
Advertisement
Table of Contents
