Installing Accessories - Konica Minolta magicolor 2200 DeskLaser Installation Manual

Hide thumbs Also See for magicolor 2200 DeskLaser:
Table of Contents

Advertisement

A fill limit mark is provided on
the inside of the media guides on
the multipurpose tray. The multi-
purpose tray holds 150 sheets of
20 lb bond (75 g/m²) paper.
Attention
Load only one type or size of media per tray at a time.
4
Adjust the media guides to fit the
size media you're loading.
Attention
Always adjust the media guides after inserting the media. A guide that is not properly
adjusted can cause poor print quality, media jams, or printer damage.
5
Specify the media size in the multipurpose tray in the printer driver.
For further information about loading and using media, refer to chapter 2, "Using Media,"
in the User's Guide.

Installing Accessories

If you purchased any printer accessories, then install them now. If installation instructions are
included with the accessory, follow them. If not, instructions are included in the User's Guide.
A complete list is in "Accessories and Consumables" on page 23. Refer to www.minolta-qms.com
or www.q-shop.com for part numbers and pricing.
Setting up Your Printer
11

Advertisement

Table of Contents
loading

Table of Contents