Download Print this page

Advertisement

magicolor 2200
®
DeskLaser
Installation Guide
1800621-001E
i

Advertisement

   Also See for Konica Minolta magicolor 2200 DeskLaser

   Related Manuals for Konica Minolta magicolor 2200 DeskLaser

   Summary of Contents for Konica Minolta magicolor 2200 DeskLaser

  • Page 1: Installation Guide

    magicolor 2200 ® DeskLaser Installation Guide 1800621-001E...

  • Page 2: Thank You

    Thank You Thank you for purchasing a magicolor 2200 DeskLaser. You have made an excellent choice. Your magicolor 2200 DeskLaser is specially designed for optimal performance in Windows and TCP/IP networking environments. Trademarks The following are registered trademarks of MINOLTA-QMS, Inc.: QMS, the MINOLTA-QMS logo, and magicolor.

  • Page 3

    Contents Getting Acquainted with Your Printer ..................1 Features 1 Front/Right Side View 1 Front Internal View 1 Left Side/Rear Side View 2 Documentation Set ........................2 Setting up Your Printer ........................3 Shipment Contents 3 Unpacking the Printer 3 Installing the Waste Toner Pack 5 Installing the Fuser Oil Roller 6 Removing the Tape from the Transfer Roller 7 Loading Media 8...

  • Page 4: Table Of Contents

    Regulatory Compliance ......................24 FCC Compliance Statement 25 Canadian Users Notice 25 Laser Safety 25 International Notices 26 Warranty Considerations ......................26 Consumables and Your Warranty 26 Manufacturer’s Declaration of Conformity—Europe 220 Volt ..........27 Manufacturer’s Declaration of Conformity—Latin America 110 Volt .........28 Manufacturer’s Declaration of Conformity—Latin America 220 Volt .........29 Contents...

  • Page 5: Getting Acquainted With Your Printer

    Getting Acquainted with Your Printer Features Print Speed 5/20* pages per minute SDRAM 32 MB Resolution 1200 x 600 dpi 500-sheet Letter/A4/Legal (Upper Media Tray) Standard Multipurpose Tray Standard Lower Feeder Unit Optional Duplex Unit Optional 5-bin Mailbox Optional 64 MB Memory Expansion Optional *5 = color;...

  • Page 6: Left Side/rear Side View

    Left Side/Rear Side View 1—Ventilation grille 2—Interface 3—AC power connector 4—Top cover 5—Output tray 6—Main power switch 7—Hand grips for moving printer 8—Media tray (left side) Documentation Set Your magicolor 2200 comes with one CD-ROM. All the documentation is on this CD-ROM unless otherwise noted below.

  • Page 7: Setting Up Your Printer

    Setting up Your Printer WARNING! The printer weighs 87.1 lbs (39.5 kg) without consumables. To avoid injury, at least two people must lift and move the printer. Attention Do not plug in the printer’s power cord before completing all installation steps. Shipment Contents Printer with a 500-sheet letter/A4/legal media tray Consumables kit...

  • Page 8

    With another person’s help, lift the printer from the carton, and place it in its intended location. A third person’s assis- tance may be required if the printer is lifted above waist level. When lifting and carrying the printer, use the hand grips and the pull-out carrying bars .

  • Page 9: Installing The Waste Toner Pack

    Remove the tape holding the toner cartridge carousel in place. Remove the piece of foam attached to the front of the toner cartridge carousel. Installing the Waste Toner Pack The waste toner pack collects the excess toner remaining on the OPC drum cartridge. Remove the waste toner pack from its plastic shipping bag.

  • Page 10: Installing The Fuser Oil Roller

    Installing the Fuser Oil Roller Push the top cover latch and open the top of the printer Remove the fuser oil roller from its box. Attention Lift and hold the fuser oil roller only by the handle. Do not allow the roller surface to contact the table or get dirty.

  • Page 11: Removing The Tape From The Transfer Roller

    With the top of the printer open, rotate the two fuser oil roller levers to the locked position. If the fuser oil roller release levers are not correctly set, the top cover cannot be closed. Close the top cover gently to avoid jarring the fuser oil roller.

  • Page 12: Loading Media

    Make sure the transfer roller unit handles remain in the down position. Close the right cover. Loading Media Loading the Media Tray Slide out the media tray. Remove the tape and the packing material from the media pressure plate. Push the media pressure plate down to lock it in position.

  • Page 13

    Adjust the media guides to fit the size paper you’re loading. Squeeze the retainers, move the guides to the appropriate location (media sizes are listed on the tray), and release the retainers. Attention The media should fit easily between the guides. Improperly adjusted guides may cause poor print quality, media jams, or printer damage.

  • Page 14: Loading The Multipurpose Tray

    Slide the media tray all the way If you have removed the tray from the printer, slightly tilt up the front of the tray to insert it into the guide rails to slide it back in. Loading the Multipurpose Tray Open the multipurpose tray.

  • Page 15: Installing Accessories

    A fill limit mark is provided on the inside of the media guides on the multipurpose tray. The multi- purpose tray holds 150 sheets of 20 lb bond (75 g/m²) paper. Attention Load only one type or size of media per tray at a time. Adjust the media guides to fit the size media you’re loading.

  • Page 16: Plugging In/turning On The Printer

    Plugging in/Turning on the Printer Make sure the printer is turned off. Plug the printer power cord into the printer and into the dedicated, grounded, surge-protected electrical outlet. WARNING! Do not overload the outlet. For products installed outside North America, do not connect the groundwire to gas or water pipes or grounding for telephones.

  • Page 17: Control Panel Indicators

    PressOn line First? This key has no function on the magicolor 2200 DeskLaser but is used to set MP SIZE the mutipurpose tray media size on magicolor 2200 Crown printers. Media sizes are controlled through the printer driver on magicolor 2200 DeskLaser printers.

  • Page 18: Configuration Menu Overview

    Configuration Menu Overview Language Sample Page Error recovery Engine Energy saver Print density Chain inputbins Chain outputbins IP address Network HW address Subnet mask Conn. timeout Ethernet speed Default router NMS1 NMS2 NMS3 Page count Service Clear care Language Status and error messages as well as configuration menus and options can be displayed in the message window in one of the available languages.

  • Page 19: Sample Page

    Sample Page This menu item initiates the printing of a sample page that can be used to check print quality. Menu Sample Page Purpose Prints a sample page. Choices Yes—Prints a sample page. No—Doesn’t print a sample page. Default Engine The following menus allow you to configure the hardware control settings of your printer.

  • Page 20: Network

    Chain Inputbins This menu item is available only if an optional media cassette is installed. Menu Engine/Chain Inputbins Purpose Allows you to “chain” cassettes (inputbins) so that when the first cassette empties, the printer automatically draws media from the other cassette. Choices On—Switch to the next cassette with the same size and type of media when the default cas- sette is empty.

  • Page 21

    Subnet Mask The Subnet Mask menu allows you to set the printer’s subnet mask. The address is in the format xxx.xxx.xxx.xxx. Menu Network/Subnet mask Choices Each xxx . xxx . xxx . xxx triplet can have a value of 001–254. Default 000.000.000.000 Notes...

  • Page 22

    NMS1–NMS3 SNMP (Simple Network Management Protocol) is a standard protocol used to monitor devices and the networks to which they attach. The NMS1, NMS2, NMS3 menus allow you to identify and configure up to three Network Management Stations (NMSs). You must provide the following information about each NMS that you want to be able to access the printer: address, community name, and access.

  • Page 23: Service

    The 3 NMS’s are recognized by the printer in sequential order, with NMS1 first and NMS3 last. When a connection is made, the printer looks for a matching IP address assigned to the NMS’s, and stops looking once a match is found. Since the IP address setting of 000.000.000.000 is treated as a wildcard, if NMS1 has this setting, then the other 2 NMS’s have the access assigned to NMS1.

  • Page 24: Installing Printer Drivers And Software

    Installing Printer Drivers and Software The printer driver and additional software found on the Utilities and Documentation CD-ROM can be installed on PCs using any of the following operating systems: — Windows XP — Windows Me — Windows 2000 — Windows NT4 —...

  • Page 25: Selecting The Crown Port

    From the Start menu, choose Settings. Choose Printers. In the Printers window click the right mouse button on the magicolor 2200 DeskLaser printer to display the printer’s menu. Choose Properties. Choose the Details tab (Windows Me/98/95) or Ports tab (Windows XP/2000/NT4).

  • Page 26

    Symptom Cause Solution Printer power The power cord is not Turn the power switch off (O) position, then remove the is not on. correctly plugged into the outlet. power cord from the outlet and plug it back in. The power switch is not correctly Set the power switch to the off (O) position, then set it turned on.

  • Page 27: Accessories And Consumables

    Symptom Cause Solution Waste toner The transfer belt left release lever is Turn the left release lever clockwise to the 2 o’clock pack cannot not set correctly. position, then install the waste toner. be installed. The laser lens cover is not installed, Reinstall the laser lens cover.

  • Page 28: Regulatory Compliance

    Purchasing extra trays may be convenient when changing media formats and/or media qualities vary. Printer Stand/Cabinet Various models are available. Crown Conversion Kit Converts a magicolor 2200 DeskLaser to a magicolor 2200 Crown printer model. Consumables Description Remark(s) Fuser oil roller...

  • Page 29: Fcc Compliance Statement

    Electromagnetic FCC (USA) Emissions (EMI) Title 47 CFR Ch. I, Part 15 Class B Digital Device (Class A Digital Device with Token-Ring or LocalTalk interface installed) Industry Canada (Canada) ICES-003 Issue 3 Class B Digital Device (Class A Digital Device with Token-Ring or LocalTalk interface installed) International (EU) EN 55022...

  • Page 30: International Notices

    Class A This is a class B device, but with an optional Token-Ring or LocalTalk interface installed, it changes to a Class A device. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

  • Page 31: Consumables And Your Warranty

    Don’t return any merchandise to the manufacturer without calling for a return merchandise authorization (RMA) number. Refer to the Service & Support Guide for the Support telephone number where you can obtain an RMA number. If you have any questions, refer to www.minolta-qms.com. Consumables and Your Warranty Use of consumables not manufactured by MINOLTA-QMS or use of non-supported print media may cause damage to your printer and void your warranty.

  • Page 32: Manufacturer's Declaration Of Conformity-europe 220 Volt

    Manufacturer’s Declaration of Conformity—Europe 220 Volt MINOLTA-QMS Europe B.V. (supplier’s name) Reactorweg 160, 3542 AD Utrecht, The Netherlands (address) declare under our sole responsibility that the product magicolor 2200 DeskLaser (base product family name) MC2200GDI-2 (model number located on dataplate) 4120 (print engine model/type number)

  • Page 33: Manufacturer's Declaration Of Conformity-latin America 110 Volt

    Volt MINOLTA-QMS, Inc. (supplier’s name) One Magnum Pass, Mobile, Alabama, USA, 36618 (address) declare under our sole responsibility that the product magicolor 2200 DeskLaser (base product family name) MC2200GDI-1 (model number located on dataplate) 4120 (print engine model/type number) to which this declaration relates is in conformity with the following standard(s) or other normative document(s) UL 1950 Third Edition, 1995;...

  • Page 34: Manufacturer's Declaration Of Conformity-latin America 220 Volt

    Volt MINOLTA-QMS, Inc. (supplier’s name) One Magnum Pass, Mobile, Alabama, USA, 36618 (address) declare under our sole responsibility that the product magicolor 2200 DeskLaser (base product family name) MC2200GDI-2 (model number located on dataplate) 4120 (print engine model/type number) to which this declaration relates is in conformity with the following standard(s) or other normative...

Comments to this Manuals

Symbols: 0
Latest comments: