Konica Minolta magicolor 2200 DeskLaser Installation Manual page 21

Subnet Mask
The Subnet Mask menu allows you to set the printer's subnet mask. The address is in the format
xxx.xxx.xxx.xxx.
Menu Network/Subnet mask
Choices Each xxx . xxx . xxx . xxx triplet can have a value of 001–254.
Default 000.000.000.000
Notes If subnets are not used with your network, the subnet mask should remain 000.000.000.000.
(Check with your network administrator.) This allows the interface to provide automatic sensing
of gateways. If you identify a subnet mask, this automatic sensing is disabled.
Once you save your changes to this menu, the printer automatically reboots.
The address must consist only of numbers and periods. Selecting a letter or another symbol
results in an error message.
All xxx values must be three digits (for example, 1 is entered as 001, and 10 is entered as 010).
Connection Timeout
This setting determines the amount of time that the network connection can remain inactive before
it is closed.
Menu Network/Conn. Timeout
Choices 0–999 (seconds)
Default 0
Notes A new network connection is established every time a print job is sent to the printer.
Ethernet Speed
The Ethernet Speed menu allows you to select the Ethernet network speed.
Menu Network/Ethernet Speed
Choices Autodetect
10MBit–10 Mbit/Sec Half Duplex
100MBit–100 Mbit/Sec Half Duplex
Default Autodetect
Effectivity Immediately
Default Router
The Default Router menu allows you to set the Internet address of a router. The address is in the
format xxx.xxx.xxx.xxx.
Menu Network/Default Router
Choices Each xxx . xxx . xxx . xxx triplet can have a value of 001–254.
Default 000.000.000.000
Notes
If gateways are not used with your network, the router address should remain
000.000.000.000. (Check with your network administrator.)
Once you save your changes to this menu, the printer automatically reboots.
The address must consist only of numbers and periods. Selecting a letter or another symbol
results in an error message.
All xxx values must be three digits (for example, 1 is entered as 001, and 10 is entered as 010).
Configuration Menu Overview
17