Table of Contents
Advertisement
4
Adjust the media guides to fit the size paper you're loading.
Squeeze the retainers, move the guides to the appropriate location (media sizes are listed on
the tray), and release the retainers.
Attention
The media should fit easily between the guides. Improperly adjusted guides may cause
poor print quality, media jams, or printer damage.
5
Load the media face-up, short edge toward the right of
the tray.
Often, an arrow on the media package label
indicates the printing-side of the media.
A fill limit mark is provided on the inside of the tray. The
media tray holds 500 sheets of 20 lb bond (75 g/m²)
paper.
Make sure that the paper fits easily between the guides
and the paper corners are under the left and right
media-separating tabs and are not bent.
For further information about loading and using media,
refer to chapter 2, "Using Media," in the User's Guide.
Setting up Your Printer
9
Advertisement
Table of Contents
