Indicator Lights For The Tg - Arris Touchstone TG862 User Manual

Getting
Safety Started
Battery
Installation Installation

Indicator Lights for the TG862

The Touchstone Telephony Gateway has ten LED indicator lights to assist in trou-
bleshooting.
Wiring Problems
If the Telephony Gateway begins flashing all its lights for more than 10 seconds, this
indicates a problem with the telephone wiring — the red and green wires may be
shorted (touching), or there may be undesired voltage on the lines. If this pattern
persists for more than 10 seconds, disconnect the telephone lines from the Tele-
phony Gateway, then call a wiring technician for assistance.
Patterns: Normal Operation (LAN and Telephone)
The following table shows light patterns for the Ethernet and wireless LANs, and the
telephones, during normal operation.
AC Power
No AC Power
Firmware Upgrade (normal operation) (normal operation) (normal operation)
Touchstone TG862 Telephony Gateway User's Guide
Ethernet
Configuration Usage
Mode Ethernet
On = Computer
Connected
Off = Computer
not connected
Flash = Com-
puter Activity
Off
Troubleshooting Glossary
WiFi Tel 1 / Tel 2
On = WiFi
Enabled
On = On-hook
Off = WiFi
Flash = Off-hook
Disabled
Off = disabled
Flash =
Computer Activity
On = On-hook
Off Flash = Off-hook
Off = disabled
42