Arris Touchstone TG862 User Manual page 16

Getting
Safety Started
Compartment
Receiver
Slots
Battery
Installation Installation
3
Battery
4
Hinge Tabs
Touchstone TG862 Telephony Gateway User's Guide
Ethernet
Configuration Usage
Push the battery pack into the bay until it seats into place. If you are tak-
ing the battery out of the Telephony Gateway, position your finger
in the battery opening area and use leverage to dislodge the battery
while pulling it straight back.
Note: The Telephony Gateway will not begin operating until you apply AC
power.
Replace the door. To do so, place the hinge tabs of the battery door into the
receiver slots inside the Telephony Gateway battery compartment on the
opposite end of the battery opening. Rotate the door toward the unit until
the latch snaps back into place.
Note: Telephony Gateways use a Lithium-Ion battery pack. Please recycle
or dispose of the battery responsibly and in accordance with local ordi-
nances.
Troubleshooting Glossary
16