Arris Touchstone TG862 User Manual page 17

Getting
Safety Started
Battery Slots
Battery
Pull Strap
Battery
Installation Installation
TG862 Extended Battery Installation and Replace-
ment
Latch End
Use this procedure to install or replace the backup battery.
1
2
Battery Guides
Touchstone TG862 Telephony Gateway User's Guide
Ethernet
Configuration Usage
Press down and pull back on the latch holding the battery door (on the bot-
tom of the Telephony Gateway). Pull the door toward you. Set the door aside
in a safe place.
CAUTION
Risk of equipment damage
Improperly inserting the battery may damage the battery connector in
the Telephony Gateway. Carefully follow the instructions in the next
step to avoid damage.
Hold the battery pack so that the guides on the battery align with the slots
on the Telephony Gateway and slide the battery into the bay. The diagram
on the left shows the proper orientation.
Note: Batteries will not insert completely into the Telephony Gateway if not
oriented correctly. The battery should slide into the bay without significant
force. Line up the slots in the battery bay with the guides on the battery
and apply even pressure on both ends of the battery.
WRONG
Troubleshooting
WRONG RIGHT
Glossary
17