Configuring Your Wireless Connection; Configuring The Wireless Connection - Arris Touchstone TG862 User Manual

Getting
Safety Started
Security
Label
2 2 4
1/2 1 3
Telephone Ethernet
Reset USB
10/100/1000
Battery
Installation Installation
Configuring Your Wireless Connection
The TG862 ships with wireless LAN security set by default. See the security label
on your product (shown on image at the left) for the factory security settings: net-
work name (SSID), encryption method, network key, and WPS PIN.
Note:
Cable
If you need to modify the Telephony Gateway's default wireless security settings,
or if you want to configure any other wireless LAN settings, refer to the following
instructions.
Accessing the Configuration Interface
Follow these steps to access the configuration interface. You should have already set
up the TG862 as described in
1
2
3
Touchstone TG862 Telephony Gateway User's Guide
Ethernet
Configuration Usage
You must set up your computer and other client devices to work
with the security settings on the TG862. Refer to the documen-
tation for your client device for instructions on setting security.
On most computer systems you only need to select the network
name (SSID) device and enter the encryption key. If your com-
puter or client device supports WiFi Alliance WPS (Wireless Pro-
tected Setup), activate WPS on your computer or client device
and the TG862 simultaneously to easily set up your system se-
curity.
Installing and Connecting Your Telephony
a) If security has been properly set up on your computer to access the wire-
less LAN on the TG862, use the connection utility for your operating system
to connect to the wireless LAN using its network name (SSID), as shown on
the security label.
b) If you cannot access the wireless LAN, you must first establish a wired
Ethernet connection between your computer and the TG862.
In your web browser, open the page http://192.168.0.1/ to access the
wireless router setup.
The Login screen displays.
Note: The default user name is "admin". The default password is "pass-
word", in lower case letters.
Enter the user name and password and click the Apply button to log in.
The System Basic Setup screen displays.
Troubleshooting Glossary
Gateway.
26