Cleaning The Unit - Biddle CA2 Manual

M
AINTENANCE
5
4
3
2
1
3
4
3
3
4.2

Cleaning the unit

50
3. Remove the filter module 2 from the inlet grate.
4. Remove the filter from the filter module:
3
3
5. Clean or replace the filter.
2
6. Mount all components in reverse order to the dismantling.
Long-life filter in recessed and cassette models
1. Take the inlet grille out of its frame:
2
1
2. Loosen the screws 3 and remove the strips 4.
4 3
3. Slide the filter out of the grille.
4 4. Clean or replace the filter.
5. Mount all components in reverse order to the dismantling.
You may clean the exterior of the unit with a damp cloth and a
domestic cleansing agent. Do not use any solvents.
c
- Loosen the screws 3.
- Remove the strip4.
- Do the same on the other side of the module.
- Take out the filter material 5.
- Push the two pins 1 in the grille towards one
another:
The grille will tilt down.
- Push the two pins (at 2) towards one another and take
the grille out.
Caution:
Make sure no water runs into the unit.
C A C
OMFORT IR URTAIN