Installing Control Panel And External Controls - Biddle CA2 Manual

M
ANUAL
2.8

Installing control panel and external controls

Type CA M-150-W-F
Biddle bv Code 1213
Markowei 4
Nº 5426/1-1 00-01
NL-9288 HA Kootstertille
M 60 kg
Medium LPHW
p 1400 kPa
max
Version: 6.1 (05-12-2011)
6. Put back and screw down the inspection panel.
w
7. Connect the power supply cable to the isolation switch.
c
2.8.1 Control panel details
Positioning
•
Cabling
n
n
code
Multiple units operated from one control panel
U 230 V 1N~ 50 Hz
I L1 2.4 A
max
•
I L2 -
max
I L3 -
max
P 0.56 kW
motor
P -
heating
Warning:
Always attach the inspection panel using flanged
bolts with milled edges: these are needed for the
earth connection.
Caution:
Do not yet switch the power supply on.
You may fix the control panel either to the wall or to a
standard socket.
Note:
Take the following into account, otherwise faults may
occur:
- The control cable between the control panel and the
(first) connected unit must not be more than 50 m
long.
- Keep control cables away from electromagnetic fields
and interference sources such as high-voltage cables
and fluorescent-light starters.
- Stretch control cables out or roll them up neatly.
- Do not remove the dummy plug, unless otherwise
stated.
Note:
Use only control cables from Biddle. Standard modular
telephone cable is not suitable.
Up to 10 units can be connected to one single control
panel. To do so, the units must be interlinked.
I
NSTALLATION
25