Switching On And Checking Function - Biddle CA2 Manual

I
NSTALLATION
a
2.10

Switching on and checking function

34
7. Make a hole in the false ceiling with the dimensions stated
in Table 2-6.
Table 2-6 Unit hole dimensions
R
EFEREN
CE
a
b
b
For models connected to a Daikin system CA
CA Q:
2
• Switch on the Daikin indoor units and outdoor unit.
For all models
1. Check the following connections:
-
-
-
-
2. Switch the power supply on and/or plug in all connected
units.
When you switch on the power supply for the first time,
the control panel searches for connected units and then
immediately displays the number of connected units.
3. During the first start, the installation guide is started.
Follow this through to carry out the most frequently
needed settings.
If the installation guide is not displayed, it can be started
with
T
YPE
CA S-C
2
CA M-C
2
CA L-C
2
CA XL-C
2
CA 100-C
2
CA 150-C
2
CA 200-C
2
CA 250-C
2
Power supply;
Control cables between control panel and unit (or
units);
For CA V and CA Q: Control cables between unit(s)
2 2
and Daikin components.
External control components (if used).
Menu Maintenance Installation
> >
C A C
OMFORT IR URTAIN
D
IMENSIONS
829 mm
829 mm
1113 mm
1113 mm
1008 mm
1508 mm
2008 mm
2508 mm
V and
2
.