Biddle CA2 Manual page 35

M
ANUAL
Version: 6.1 (05-12-2011)
If the control unit does not function, or if the display
shows an error messages, consult section
For models with water heating or connected to a
Daikin system
4. Check that the heat exchanger is connected correctly.
5. Make sure the central heating system or the Daikin system
is turned on.
6. Make sure heating is enabled in the control panel.
7. Feel if the discharged air stream gets warm. This may take
some time.
8. Vent the heat exchanger, if necessary.
For models with electric heating
9. Make sure heating is enabled in the control panel.
10. Feel if the discharged air stream gets warm.
For models without heating
11. Feel if the unit discharges air.
I
NSTALLATION
Faults
.
35